Resin 3D-Printing Settings for Phrozen Shuffle and Phrozen XL
The Phrozen Shuffle and Phrozen XL resin 3D printers are open for third-party resins. Some Garreco Print resins have been validated on the printer and settings are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Phrozen Shuffle and Phrozen XL
General Printer Settings for Phrozen Shuffle and Phrozen XL
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Model 3D Ultra | 100 µm | 16 seconds | 110 seconds 5 base layers |
| 50 µm | 12 seconds | 110 seconds 5 base layers |
