Resin 3D-Printing Settings for AnyCubic Photon and Photon S
The Anycubic Photon and Photon S are low-powered RGB-type LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for all Garreco Print resins. Due to the low-power light source, exposure times are generally longer. The Premium resin range is specially developed for printing on low-power LCD 3D-printing like the Anycubic Photon, leading to significantly shorter exposure times. Contact us if you have any questions.
Resin 3D-print settings for the Anycubic Photon and Anycubic Photon S
General printer settings are available below. To download importable files for Chitubox, use the button below.
General Printer Settings for the Anycubic Photon 3D-Printer
| Resin | Layer thickness | Settings | Remark |
| Model 3D Ultra | 100 µm | 16 seconds | 2 x 150s bottom, 2s off-time |
| 50 µm | 13 seconds | 2 x 150s bottom, 2s off-time | |
| 25 µm | 10 seconds | 2 x 150s bottom, 2s off-time | |
| WaxCast 3D | 100 µm | 14 seconds | 5 x 80s bottom, 2s off-time |
| 50 µm | 12 seconds | 5 x 80s bottom, 2s off-time | |
| 25 µm | 11 seconds | 5 x 80s bottom, 2s off-time | |
| Model 3D Pro Beige | 50 µm | 15 seconds | 2 x 80 bottom, 3s off-time |
| Model 3D Pro Grey | 50 µm | 16 seconds | 2 x 70 bottom, 3s off-time |
| Gingiva 3D | 100 µm | 25 seconds | 2 x 80 bottom, 3s off-time |
