Resin 3D-Printing Settings for Anycubic Photon M3

The Anycubic Photon M3 is open for third party resins. Settings for the Anycubic Photon M3 are optimized for Garreco Print 3D resins. View the 3D printing parameters below and contact us if you have any questions regarding the Anycubic Photon M3 resin settings.

Resin 3D-print settings for the Anycubic Photon M3

General printer settings are available below. To download importable files for the slicer, use the button below.

General Printer Settings for Anycubic Photon M3

Resin Layer thickness % UV Power Exposure time (seconds) Base layer count Base layer exposure Lift Height Rest time per step Lift speed / retract speed
Model 3D Ultra 100 µm 100 4,0 2 50 6 2,0 90 / 150
50 µm 100 3,5 2 45 6 2,0 90 / 150
WaxCast 3D 100 µm 100 5,0 2 40 6 2,0 90 / 150
50 µm 100 3,5 2 30 6 2,0 90 / 150
25 µm 100 3,0 2 20 6 2,0 90 / 150
50 µm 100 7,0 2 20 6 2,0 90 / 150
Model 3D Pro Beige 100 µm 100 6,0 2 35 6 2,0 90 / 150
50 µm 100 4,0 2 25 6 2,0 90 / 150
Model 3D Pro Grey 100 µm 100 6,0 2 35 6 2,0 90 / 150
50 µm 100 4,0 2 25 6 2,0 90 / 150
Gingiva 3D 100 µm 100 10,0 2 20 10 2,0 60 / 90
50 µm 100 8,0 2 15 10 2,0 60 / 90