Resin 3D-Printing Settings for Anycubic Photon Mono SE
The Anycubic Photon Mono SE 3D printer is open for third-party resins. All Garreco Print resins have been validated on the printer and settings are available below. Please contact us if you have any questions regarding the resin settings.
Resin 3D-print settings for the Anycubic Photon Mono SE
General printer settings are available below. To download importable files for Chitubox, use the button below.
General Printer Settings for Anycubic Photon Mono SE
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | Lift speed / retract speed (mm/min) | wait time every step (seconds) |
| Model 3D Ultra | 100 µm | 3,0 | 2 | 60 | 6 | 60 / 60 | 2,0 |
| 50 µm | 2,0 | 2 | 20 | 6 | 60 / 60 | 2,0 | |
| WaxCast 3D | 100 µm | 4,0 | 2* | 60 | 6 | 60 / 90 | 2,0 |
| 50 µm | 3,0 | 3* | 40 | 6 | 60 / 90 | 2,0 | |
| Model 3D Pro Beige | 50 µm | 5,0 | 2 | 30 | 6 | 90 / 90 | 2,0 |
| Model 3D Pro Grey | 50 µm | 3,0 | 2 | 50 | 6 | 90 / 90 | 2,0 |
| Gingiva 3D | 100 µm | 15,0 | 2 | 80 | 10 | 60 / 60 | 2,0 |
