Settings for Beam3D Prism 3D Printer
The Beam3D Prism is a 2K RGB LCD resin 3D printer and is open for 3rd party resins. Some Garreco Print resins have been optimized. Most other resins could also work on this printer, however, no pre-settings are available. Contact us if you need support or have any questions.
Settings for the Beam3D Prism 3D Printer
General Printer Settings for Beam3D Prism
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Model 3D Ultra | 100 µm | 13 | First layers 2 x 180 seconds |
| 50 µm | 11 | First layers 2 x 150 seconds | |
| 35 µm | 9 | First layers 2 x 120 seconds |
