Resin 3D-Printing Settings for Creality Halot-Sky
The Creality Halot-Sky resin 3D printer is open for third-party resins. Some Garreco Print resins have been validated on the Halot-Sky printer and settings are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Creality Halot-Sky
General Printer Settings for Creality Halot-Sky
| Resin | Layer thickness | Exposure time (seconds) | Remark |
| Model 3D Ultra | 100 µm | ||
| 50 µm | 4,0 | 5 base layers of 50 seconds, 2 seconds light-off. | |
| 35 µm | |||
| WaxCast 3D | 100 µm | ||
| 50 µm | 5,0 | 5 base layers of 60 seconds, 3 seconds light-off | |
| 35 µm | |||
| Gingiva 3D | 100 µm | ||
| 50 µm | 9,0 | 5 base layers of 40 seconds, 3 seconds light-off. |
