Resin 3D-Printing Settings for Elegoo Jupiter
The Elegoo Jupiter is a 6K Monochrome LCD/MSLA resin 3D-printer. The Elegoo Jupiter is equipped with a 405 nm light source and is compatible with third-party resins. All Garreco Print resins have been validated on the printer and settings are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Elegoo Jupiter
General Printer Settings for Elegoo Jupiter
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Lift speed / retract speed (mm/min) | Light off-delay / bottom (seconds) |
| Model 3D Ultra | 100 µm | ||||||
| 50 µm | 4,3 | 1 | 35 | 7 | 60 / 120 | 2,0 / 2,0 | |
| WaxCast 3D | 100 µm | ||||||
| 50 µm | |||||||
| Model 3D Pro Beige | 50 µm | ||||||
| Model 3D Pro Grey | 50 µm | ||||||
| Gingiva 3D | 100 µm |
