Resin 3D-Printing Settings for Elegoo Mars 3
The Elegoo Mars 3 is a Monochrome LCD/MSLA resin 3D printer. The Elegoo Mars 3 is equipped with a 405 nm light source and is open to third-party resins. All Garreco Print resins have been validated on the Elegoo Mars 3 and the settings and downloads are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Elegoo Mars 3
General printer settings are available below. To download importable files for Chitubox, use the button below.
General Printer Settings for Elegoo Mars 3
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Lift speed / retract speed (mm/min) | Rest time in every step (seconds) |
| Model 3D Ultra | 100 µm | 4,0 | 2 | 40 | 6 | 90 / 240 | 2,0 |
| 50 µm | 3,0 | 2 | 30 | 6 | 90 / 240 | 2,0 | |
| WaxCast 3D | 100 µm | 5.0 | 2 | 60 | 6 | 90 / 240 | 2,0 |
| 50 µm | 4,0 | 2 | 60 | 6 | 90 / 240 | 2,0 | |
| 25 µm | 3.5 | 2 | 60 | 6 | 90 / 240 | 2,0 | |
| Model 3D Pro Beige | 100 µm | 6,0 | 2 | 50 | 6 | 90 / 120 | 2,0 |
| 50 µm | 5,0 | 2 | 40 | 6 | 90 / 120 | 2,0 | |
| Model 3D Pro Grey | 100 µm | 6,0 | 2 | 50 | 6 | 90 / 120 | 2,0 |
| 50 µm | 5,0 | 2 | 40 | 6 | 90 / 120 | 2,0 | |
| Gingiva 3D | 100 µm | 10,0 | 2 | 20 | 8 | 90 / 120 | 2,0 |
| 50 µm | 8,0 | 2 | 20 | 8 | 90 / 120 | 2,0 |
