Resin 3D-Printing Settings for Elegoo Mars
The Elegoo Mars LCD 3D-printer is an open source resin 3d-printer with a 405 nm light source. Settings are optimized for Garreco Print resins. Due to the low power light source of the Elegoo Mars, exposure times are generally longer for this LCD 3D-printer compared to when using DLP and SLA resin. Model 3D Ultra is especially developed for printing on low power LCD 3D-printing like the Elegoo Mars, leading to significantly shorter exposure times. Contact us if you have any questions or need support.
Resin 3D-print settings for the Elegoo Mars
General printer settings are available below. To download importable files for Chitubox, use the button below.
General Printer Settings for Elegoo Mars
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Model 3D Ultra | 100 µm | 14 | First layers 2 x 120 seconds |
| 50 µm | 12 | First layers 2 x 120 seconds | |
| 35 µm | 11 | First layers 2 x 120 second | |
| WaxCast 3D | 100 µm | 13 | First layers 2 x 150 seconds |
| 50 µm | 11 | First layers 2 x 150 seconds | |
| 35 µm | 9 | First layers 2 x 120 seconds |
