Resin 3D-Printing Settings for Elegoo Saturn
The Elegoo Saturn 4K Monochrome LCD/MSLA resin 3D-printer is a printer with a 405 nm light source, open to third-party resins. All Garreco Print resins have been validated on the Elegoo Saturn and you can find the settings and downloads below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Elegoo Saturn
General printer settings are available below. To download importable files for Chitubox, use the button below.
General Printer Settings for Elegoo Saturn
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Lift speed / retract speed (mm/min) | Light off-delay / bottom (seconds) |
| Model 3D Ultra | 100 µm | 4,5 | 2 | 30 | 6 | 90 / 120 | 1,0 / 3,0 |
| 50 µm | 4,0 | 2 | 15 | 6 | 90 / 120 | 2,0 / 3,0 | |
| WaxCast 3D | 100 µm thick parts | 5,5 | 2 | 30 | 6 | 90 / 180 | 1,0 / 3,0 |
| 100 µm thin parts | 7,0 | 2 | 30 | 6 | 60 / 120 | 2,0 / 3,0 | |
| 50 µm | 4,5 | 2 | 30 | 6 | 60 / 120 | 2,0 / 3,0 | |
| Model 3D Pro Beige | 50 µm | 4,5 | 1 | 20 | 6 | 60 / 240 | 2,0 / 3,0 |
| Model 3D Pro Grey | 50 µm | 5,5 | 1 | 20 | 6 | 60 / 240 | 2,0 / 3,0 |
| Gingiva 3D | 100 µm | 14,0 | 1 | 30 | 6 | 60 / 240 | 2,0 / 3,0 |
