Resin 3D-Printing Settings for Longer Orange 30
The Longer Orange 30 resin 3D printer is open for third-party resins. Some Garreco Print resins have been validated on the printer and settings are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Longer Orange 30
General Printer Settings for Longer Orange 30
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Model 3D Ultra | 100 µm | ||
| 50 µm | 9,5 | 2 base layers of 80 seconds | |
| WaxCast 3D | 100 µm | ||
| 50 µm | 12,0 | 5 base layers of 60 seconds | |
| 35 µm |
