Resin 3D-Printing Settings for MakeX M-One Pro 70
The MakeX M-One Pro 70 is a 2K RGB LCD resin 3D printer and is open for 3rd party resins. Some Garreco Print resins have been optimized. Most other resins could also work on this printer, however, no pre-settings are available. Contact us if you need support or have any questions.
Resin 3D-print settings for the MakeX M-One Pro 70
General Printer Settings for MakeX M-One Pro 70
| Resin | Layer thickness | Power Mode | Exposure time (seconds) | Base layer count |
| Model 3D Ultra | 100 µm | |||
| 50 µm | Medium | 2,0 | ||
| WaxCast 3D | 100 µm | |||
| 50 µm | Low | 1,4 | ||
| Model 3D Pro Beige | 100 µm | |||
| 50 µm | low | 3,5 | ||
| Model 3D Pro Grey | 100 µm | |||
| 50 µm | low | 3,5 | ||
| Gingiva 3D | 100 µm | |||
| 50 µm | medium | 11,0 | 16,5 seconds bottom exposure |
