Resin 3D-Printing Settings for Phrozen Sonic XL 4K
The Phrozen Sonic XL 4K resin 3D printer is open for third-party resins. All Garreco Print resins have been validated on the printer and settings and downloadsvare available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Phrozen Sonic XL 4K
General Printer Settings for Phrozen Sonic XL 4K
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Off-time / bottom layer | Lift speed / retract speed (mm/min |
| Model 3D Ultra | 100 µm | ||||||
| 50 µm | |||||||
| WaxCast 3D | 100 µm | ||||||
| 50 µm | 6,0 | 2 | 30 | 8 | 1,0 / 1,0 | 90 / 120 | |
| 35 µm | |||||||
| Model 3D Pro Beige | 100 µm | ||||||
| 50 µm | |||||||
| Model 3D Pro Grey | 100 µm | ||||||
| 50 µm | |||||||
| Gingiva 3D | 100 µm | ||||||
| 50 µm |
