Resin 3D-Printing Settings for Prusa SL1
The Prusa SL1 resin printer is open for third-party resins. Some Garreco Print resins have been validated on the printer and settings are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Prusa SL1
General Printer Settings for Prusa SL1
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Model 3D Ultra | 100 µm | 14 | First layers 10x 120 seconds |
| 50 µm | 13 | First layers 10x 100 seconds | |
| 35 µm | 12 | First layers 10x 100 seconds | |
| 35 µm | |||
| WaxCast 3D | 100 µm | ||
| 50 µm | 8.5 | First layers 3x 40 second | |
| 35 µm |
