Resin 3D-Printing Settings for Qidi Tech Shadow 5.5S
The Qidi Tech Shadow 5.5S resin printer is open for third-party resins. Some Garreco Print resins have been validated on the printer and settings are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Qidi Tech Shadow 5.5S
General Printer Settings for Qidi Tech Shadow 5.5S
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Model 3D Ultra | 100 µm | ||
| 50 µm | 9,5 | 2 base layers of 80 seconds | |
| WaxCast 3D | 100 µm | ||
| 50 µm | 12,5 | 5 base layers of 60 seconds |
