Resin 3D-Printing Settings for Rapid Shape S30+
Partners of Garreco Print have validated some resins on the Rapid Shape S30+. These materials were printed with open materials settings. The parameters for the open materials settings can be found below. If you do not have open material settings, then it is not possible to run our resins on the Rapid Shape printers. Contact us if you need support or have any questions.
Resin 3D-print settings for the Rapid Shape S30+
General Printer Settings for Rapid Shape S30+
| Settings for WaxCast 3D | |
| Layer thickness | 0,05 mm |
| Bottom layer count | 5 |
| Bottom exposure time | 50 seconds |
| Normal exposure time | 3,5 seconds |
| Transition layers | 5 |
| Lift speed | 2 mm / seconds |
| Bottom lift distance | 8 mm |
| Normal lift distance | 6 mm |
