Resin 3D-Printing Settings for Verty System Moon Night
The Verty System Moon Night is a resin 3D printer open for third party resins. Most Garreco Print resins have been validated and available printer settings are listed below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Verty System Moon Night
General Printer Settings for Verty System Moon Night
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Lift speed / retract speed (mm/min) | Rest time in every step (seconds) |
| Model 3D Ultra | 50 µm | ||||||
| WaxCast 3D | 100 µm | ||||||
| 50 µm | 9,0 | 2 | 60 | 10,0 | 60 / 150 | 2,0 | |
| 25 µm | |||||||
| Model 3D Pro Beige | 100 µm | ||||||
| 50 µm | |||||||
| Model 3D Pro Grey | 100 µm | ||||||
