Resin 3D-Printing Settings for Wanhao GR1
The Wanhao GR1 resin printer is open for third-party resins. Some Garreco Print resins have been validated on the printer and settings are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Wanhao GR1
General Printer Settings for Wanhao GR1
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Model 3D Ultra | 100 µm | 16 | 2 burn-in layers of 80 seconds |
| 50 µm | |||
| 35 µm |
